Technical Tapes
C&C Marine designs, manufactures and installs high-quality marking system for the industry.
Technical Tapes
C&C Marine designs, manufactures and installs high-quality marking system for the industry.
Our solutions are based on our experience across numerous projects undertaken in the demanding environments of the cruise and naval industries.
Download the complete Technical Tapes Catalogue 2025.
PRODUCTS
Technical Tapes
C&C Marine design, produce, and install all types of technical tapes for onboard requirements. From reflective tapes, to spray stop tapes, drip sto tapes, antislippery adhesive tapes, pipe marking tapes, and more. Here following a short list of the products.
Reflective tapes
SOLAS approved reflective tape is compliant to IMO Res. A658 is developed to provide high visibility to lifesaving equipment such as liferaft, lifeboat, rescue boat and lifebuoy, life vest in compliant with IMO regulation. High Performance Films are weather/resistant, conformable to a wide variety of surface. Strong eye/catching effect, excellent outdoor durability. Daytime warning signs.
Pipe/fix
Repair tape for leaking and cracked pipes. Quick repair kit including epoxy stick, gloves and application procedures.
Spray stop tapes
High/tech laminated multilayer aluminium tape, especially developed to prevent against the flammable spray of hot oil on board of latest regulations of IMO as stated in resolution A 653 (16). The IMO has amended SOLAS regulation 11/2/15.2.11 concerning provisions for the prevention of fire in engine room including fires caused by the splashing and leaking of flammable liquids from piping joints and valves.
Hatch Cover tapes
Keeps out moisture, weather, sound and fumes from your valuable cargo, the blue liner ensures a tight seal when istalled according instructions. It has excellent resistance to salt and weather conditions. This tape can be installed between 5 and 40 °C and will stand from /15 to 70 °C.
Drip stop tapes
Can be used for prevention of leaks and splash of fluid, air and powder inside pipes and hoses. It’s also used for prevention of corrosion. It has an excellent weather resistance and can be used for all cables insulation covering. It doesn’t use any adhesive but will self close within 20 to 30 minutes by taping several overlaps.
Corstop zinc tapes
Special developed noncorrosive pure (99,9%) zinc layer. It is UV resistant and will not be affected by water, gas etc. Corrosion will not happen from the inside. Corstop Zinc tape is resistance till a temperature of 80 °C. It is used for protection against any direct corrosion. The presence of an adhesive layer, anchored on the surface to be protected, is an additional defence against corrosion.
Heat stop tapes
It is used for insulation of hot piping system on board, it meets SOLAS Regulation II/2/12.2.10, also comply with MSC 61 (67). It’s composed by Heat Stop tape and an adhesive aluminium roll.
Anticorrosive tapes
It is used for protection against corrosion and the water proofing of pipe, flanges and valves for marine use. It’s composed by a neutral compound based on satured petroleum hydro carbons (petrolatum) with inert fillers.
Antislippery adhesive tapes
This product was engineered to exceed OSHA standards by providing a durable, consistent non/slip surface. Superior resistance to chemicals and fluids grants internal onboard use. We can use assure the most aggressive durable adhesive system on the market. It meets SOLAS chapter II/2 regulation 13 providing slip free surface underfoot to direct access to the embarkation deck, external open stairway and passenger ways.
Photoluminescent tapes
Our photoluminescent tapes are powered by CC/Glowmarine, high intensity photoluminescent product.
Machinery Labels
C&C Sign Maker has implemented his range of engraving and printed labels. During these years we have designed several specials labels and brackets basing on the customer needing. Every kind of labels and brackets can be engineered and produced in our company.
Pipe Marking Tapes
ISO 14726:2008 specifies main colours and additional colours for identifying piping system in accordance with the content or function on board ships and marine structures. This International Standard does apply to piping system for medical gases, industrial gases and cargo.
The colours stripes shall be positioned perpendicular to the axis of the pipe. Pipelines shall be marked at least once in each room; at each penetration point in bulkheads, walls and decks; close to each valve; within a distance of 3 to 5 mt of the lenght of the pipeline, whereby the local conditions may require a more frequent marking due pipe bends or the close proximity of pipes for different service.
Arrows to indicate the direction of flow in a pipe are recommended. Pipes with flow in opposite directions at different times may be marked with arrows pointing in opposite directions. C&C Pipemark tapes are composed by film with high performance polymeric stabilized calendered soft vinyl films, coated with a durable permanent adhesive giving excellent dimensional stability.
The tapes are in single colour to for a more economical and flexible solution. C&C can produce any kind of custom tape including three colours tapes and the printing of system name and number for a better understanding.
